Floor installation method floor installation preca

2022-07-22
  • Detail

Wood floor is one of the commonly used building materials for modern home decoration floor. The so-called floor is "three floors, seven installation", that is, whether the installation is good or bad determines 70% of the floor quality. If the floor pavement is not in place, it is likely to lead to floor warping, creaking, and even arching in the future. Therefore, the floor installation must not be taken lightly. Then, what are the steps of floor installation? Let's get to know and have a look

wood floor is one of the commonly used building materials for modern home decoration floor. The so-called floor is “ Three floors, seven installation ”, That is, the installation determines 70% of the floor quality. If the floor pavement is not in place, it is likely to lead to floor warping, creaking, and even arching in the future. Therefore, the floor installation must not be taken lightly. Then, what are the steps of floor installation? Let's get to know and have a look

detailed explanation of floor installation steps

1. Lay damp proof membrane

after the ground is cleaned, lay damp proof membrane on the ground, not only for damp proof, but also for shock absorption and reducing trampling sound. The damp proof membrane must completely cover all paved floors, and the joints should be sealed with adhesive tape. After all the moisture-proof films are laid, the floor can be paved. If the ground of your home is uneven, it is recommended to use the bedding treasure. The bedding treasure can play the role of sound insulation, heat preservation, improving foot feel, moisture-proof and mothproof, raising the ground for laying pipes, adjusting the height difference with tiles, etc

2. Lay the floor

open the floor package and start laying the floor. If the owner is present, it is best to choose the floor pattern by yourself, and put the plate with less beautiful pattern or obvious scar on the position with furniture, so that it can be covered

3. Floor splicing

the edge of the floor close to the wall should be inserted with a wooden tenon tip, so that the floors are close to seamless. Generally, when two pieces are spliced, a hammer will be used to tap the short end of the floor to make it close to the other one. Close to the wall, use professional tools to tighten the last floor, and tap it inward

4. Pave from inside to outside

the floor is paved from inside to outside, from the door to the living room and then to the room, simulating the walking route of people entering the door, so there is a continuity. There should be a certain gap between the floor splices to ensure the flexibility of the wood

5. Fill the gap

if it meets the corner or splice, it is necessary to cut the floor and splice it to the wall. A gap of 8-10mm should be maintained between the floor and the wall to ensure the thermal expansion and cold contraction of the wood. This gap will be filled with skirting line later

6. Install skirting line

after all floors are paved tightly, remove the wooden tenon inserted into the floor around the wall, install skirting line, and cover the gap between the floor and the wall; The joints between the floor and marble or other materials need to be connected with wood fillets. The fillets with similar color to the floor shall be pasted between the two floors with special glue and compacted

summary: the above introduces the detailed steps of floor installation. I believe you also have a general understanding of floor installation. If you want to know more about relevant knowledge, please continue to pay attention to the information platform

成都风湿医院

广州胎记疤痕医院

济南男科医院

Copyright © 2011 JIN SHI